Posted on June 14th, 2012
Multiple customers of mine have had issues with the error message “Network path is not found”. Windows can throw this error message for a number of reasons. This often becomes a problem when you’re trying to remotely monitor event logs, services, disk space, etc. using network monitoring software such as Overseer Network Monitor.
If you’re having this issue, try these things:
- Make sure both Windows PCs(your computer and the remote computer) are running on the same network/LAN.
- Disable the Windows firewall. If this works, you know it’s the firewall blocking traffic, and you can find what rule to add to the firewall to make things work.
- Disable UAC!. Note that you may have to disable remote UAC in addition to the GUI disabling of user account control
- Check the clocks on both computers. If the times are not within 15 minutes of each other, this problem may occur. Be sure to check the date and the time, as it’s easy to miss a different year when looking at just the time or day.
- Check the status of these services and make sure they’re running on both ends:
- Remote Registry Service
- Computer Browser
- Remote Procedure Call
- TCP/IP NetBIOS Helper Service
- Check your network card(s) properties, and check these options:
- Client for Microsoft Networks
- File and Printer Sharing for Microsoft Networks
- Also make sure “Enable NetBIOS over TCP/IP” is enabled
- Make sure “802.1x” authentication is disabled(potentially buried under ‘configure’ tab for network adapter
- If using local accounts, be sure you’re referring to them as MACHINE\username, and **not** .\username. If you use .\username, you will get “network path was not found”, which is a very unhelpful in resolving this problem.